Split Alubos frontplate for the FlangedCase160 or Alubos1600 case, with CNC-d holes for the
Check-out the transparent frontplate. It's really cool, and sufficiantly durable if no drills needed.
- 4 corner-screws
- Drill-count=0 means NO drills
- Drill-count="3-small" means maximum 7,7,7 mm drills (usually 7,6,7 mm so the small brass pneumatic nipple can be tightly mounted in the middle 6mm hole), drilling up is easy if necessary
- Drill-count="3-big" means max 7,10,7 mm so the pneumatic connector ("VIV-type" for 6/4mm tube) can be mounted in the middle 10mm drill. The 7mm drills are most often used for EGT cables (but LCD, PS2-keyboard, or other is also possible).
The EC36 and EC18 position was CNC-d to match the v3.x PCB.
It is very important to solder the EC.. connectors with the frontplate applied : otherwise it might be impossible to apply frontplate later (without unsoldering EC.. connectors or scratching away 0.2mm from PCB edge).
Take care at assembly: follow the right order
You also likely want the
Made of 2 parts: splitting is necessary to properly mount the EC (EconoSeal-III) connectors.