Versatile Engine Management Systems / / ACMV, LLC
  Startseite » Katalog » Engine Management » Sensors » Ihr Konto  |  Warenkorb  |  Kasse   
Engine Management-> (157)
  Adapter cables (12)
  iButton security (2)
  Ignition (5)
  Kraftstoffanlieferung (6)
  Pneumatic parts (7)
  Sensors (27)
  Universal Harness (3)
  Connectors (16)
  Accessories (7)
  Wiring Accessories (13)
  -> (13)
  -> (35)
Neue Produkte Zeige mehr
ECU VEMS V3 internal CAN
ECU VEMS V3 internal CAN
Verwenden Sie Stichworte, um ein Produkt zu finden.
erweiterte Suche
Liefer- und

 und Datenschutz

Ether Cryptocurrency
Bitcoin Cryptocurrency
Unsere AGB's
Temperature sensor 0.90EUR

NTC 2k2 is a resistor, which significantly changes its resistance with temperature (R decreases as T increases). 2k2 at room temperature (25C), around the value of the most widely used temperature sensors in the automotive industry (GM, Honda, etc...). Choose airdenfactor_2200_256 during firmware upload (or 2063_256 if you want slightly lower reading) .
They fall to in the 100 Ohm range at 100C, and even lower at higher Temp. Usable for about 150C. Above 150C (EGT, head-T of hot engines), the thermocouple is used (which is much more costly and harder to measure, but more linear) for measuring temperature.
The MAT and CLT sensors of most cars are this component packaged for easy mounting to a particular engine (usually threaded). This can be mounted with epoxy glue.

  • Axial: now OUT OF STOCK, supplier says available by end of January 2011 the more expensive NTC looks like a glass diode, legs at the opposite end (axial package): can be mounted with better vibration resistance. Extremely fast response
  • the radial package has legs on the same side

See also: *K-thermocouple

Für weitere Informationen, besuchen Sie bitte die Homepage zu diesem Produkt.
Dieses Produkt haben wir am Dienstag, 23. März 2004 in unseren Katalog aufgenommen.
Kunden, die dieses Produkt gekauft haben, haben auch folgende Produkte gekauft:
LSU4.9 Wideband O2 sensor
LSU4.9 Wideband O2 sensor
Wideband connector LSU4.9
Wideband connector LSU4.9
Relay and fuse holder combined
Relay and fuse holder combined

5V DC regulator
EGT sensor 3mm (K-type)
EGT sensor 3mm (K-type)
Warenkorb Zeige mehr
1 x K-compensational cable
1 x Differential Pressure sensor
1 x HALL sensor
1 x MAT sensor
1 x Boost MAP and MAT
1 x revirgin6/3
1 x Coolant sensor AMP-connector
1 x Hall Sensor - Bipolar
1 x Wideband bung M18x1.5
1 x 250kPa MAP sensor/bare
1 x Bosch knock sensor
1 x 700 kPa MAP sensor
1 x Oil Pressure Sensor
1 x TPS + connector
1 x 700kPa MAP sensor/bare
1 x Hall Sensor - Unipolar
Benachrichtigungen Zeige mehr
BenachrichtigungenBenachrichtigen Sie mich über Aktuelles zu diesem Artikel Temperature sensor
Empfehlen Sie diesen Artikel einfach per eMail weiter.
Bewertungen Zeige mehr
Bewertung schreibenBewerten Sie dieses Produkt!
English Deutsch

Copyright © 2017 VEMS Shop
Powered by osCommerce